Assembly & Disassembly

Plinker

New member
Joined
Dec 22, 2025
Messages
1
I bought myself a Canik TP9SA. I own several rifles and shotguns but this is my first hand gun. Right out of the box I have ran into an issue.
Familiarizing myself with the Canik was my first priority. My first responsibility was to learn everything about it to use and handle it safely.
I read the manual cover to cover and this firearm has a lot of features that was new me especially the decocker.
So I naturally I broke it down to inspect it and them reassembled it. That was easy and straightforward, so I did it again.
Out of curiosity wanted to see the slide action work without the spring and barrel being
installed inside of it. I slide it back and forth an observed all the movements inside.
Now my issue is that I cannot remove the slide from the lower half of the gun using the removal method. The manual did not mention
not to do this nor, did contain information about what to do if it's done. I have searched online everywhere and have had no success.
Has anyone else done this? Is there a simple solution to this? Or will I have to take it to a gunsmith.
I feel disappointed it's never seen a round.
 
First thing, keep the Canik TP9SA pointed in a safe direction and verify it is unloaded again, mag out and chamber empty. Do not force anything or start tapping pins if you are not sure what you are moving. Since this is your first handgun and the TP9SA has that decocker, it is worth stopping here and letting a competent shop take a look if the slide is truly stuck.
 
The problem is not the CANIK, it is your choice to do something previously unheard of. Your CANIK users manual tells you what to do and how to do it, and it is a compendium of what to do properly. If it is not in the manual DON'T DO IT! It did not warn you about the procedure you chose to do, because doing such is unknown. It also did not warn you about sitcking a loaded pistol in your mouth and pulling the trigger, so I am now warning you - DON'T DO THAT!!. A qualified, well-reputed gunsmith in your area is you best shot for salvaging your CANIK and getting to actually shoot it.
 

Latest posts

Back
Top